WCT-161275 Linear sliding table pneumatic coping sled with 1000/40’’ rail
Turn any Shaper into a production coping machine.
This is the newest addition to our industrial series of linear sliding table coping sleds and this introductory price will not last long! If you've struggled with regular inaccurate coping tables, t slot tables and fences or like me have a sliding table shaper that has horrible accuracy then this is going to be one of the best purchases you've ever made! Designed and made by a journeyman woodworker and engineer with over 30 years of experience in the historical millwork and cabinetry field. For comparison, using one of our new tables is like going from a standard biscuit jointer to a LAMELLO zeta P2. There's no comparison between the two other than what they do.
Large one pc linear rail is available up to 84'' in length with a 2.25'' overall height off the machine table.
For instance, the Delta machine in pictures has a standard 1'' spindle and still has over 3'' of usable spindle above our table. With regular 1.25" spindle machines there is well over 4'' capacity. Most larger shapers and tenoners lose no capacity at all as the spindle has more travel vertically allowing the entire spindle to move above the table.
This sled is perfect for the shop that does everything. You can cope 5 or more cabinet door rails safely and accurately at a time saving an amazing amount of time or do giant exterior bottom door rails of up to 12'' knowing that the parts will come out perfect every time.
SPECS:
-Table size 16''x 12''x 0.75'' thick Table can vary slightly depending on how much material is removed to square edges +/- 0.25''.
-Capacity 12'' x 2''. Additional clamp platen can be ordered to increase capacity to over 4''. This takes less than a minute to swap out. If you need larger capacity check out our other models.
-Base model comes with 0.5'' x 2'' x 12'' long fence. One fixed hole two adjustable for squaring after fitting to machine and semi-permanent fixing.
-Two vertical clamping cylinders with a maximum 260 lbs clamping pressure.
-Horizontal cylinder clamp with 75+ lbs. of pressure to hold stock firmly to fence. Clamps are sequenced so horizontal clamp activates first pushing stock to fence then pressure shoe engages holding stock firmly to table.
-Adjustable fence for squaring cope/tenon ends after initial setup.
-Acrylic shield for operator safety. Height of Acrylic guard can be changed in under one minute.
-Clamp can either be ordered with foot pedal clamp control or fence mounted controls. Specify at time of order.
-Table is coated with non-slip clear material that can easily be recoated at any time with a quick scuff and spray.
- All fasteners and hardware are 100% aluminum and stainless.
-1/4'' NPT quick connect air fittings.
I want to speak very frankly to you about these products. I’m a straight shooter and I say what I mean and don’t BS anyone. There’s no point, my business reputation is to important to play games with prospective clients that we want to build a lifetime relationship with. Our tool offerings will be growing weekly and I want all of our amazing tools in everyone’s shops. They will make you and your product’s more profit and that’s the bottom line….
IF you know tools and machinery you know that big manufacturers would easily charge double for a fixture like this. If Martin, SCM or Felder had designed these tables they would be double the price if not more. However, fortunately for you we are a young start up with brilliant ideas and amazing execution. That being said we know we cannot charge what they are truly worth. So now you get to purchase something that will last a lifetime and make your lives safer more accurate and repeatable for a fraction of the value. These prices will absolutely be going up once this name has been established and we have built a reputable name. We simply will not be able to stay in business at these prices, but you have to start somewhere,
WCT-161275 Linear sliding table pneumatic coping sled with 1000/40’’ rail
Turn any Shaper into a production coping machine.
This is the newest addition to our industrial series of linear sliding table coping sleds and this introductory price will not last long! If you've struggled with regular inaccurate coping tables, t slot tables and fences or like me have a sliding table shaper that has horrible accuracy then this is going to be one of the best purchases you've ever made! Designed and made by a journeyman woodworker and engineer with over 30 years of experience in the historical millwork and cabinetry field. For comparison, using one of our new tables is like going from a standard biscuit jointer to a LAMELLO zeta P2. There's no comparison between the two other than what they do.
Large one pc linear rail is available up to 84'' in length with a 2.25'' overall height off the machine table.
For instance, the Delta machine in pictures has a standard 1'' spindle and still has over 3'' of usable spindle above our table. With regular 1.25" spindle machines there is well over 4'' capacity. Most larger shapers and tenoners lose no capacity at all as the spindle has more travel vertically allowing the entire spindle to move above the table.
This sled is perfect for the shop that does everything. You can cope 5 or more cabinet door rails safely and accurately at a time saving an amazing amount of time or do giant exterior bottom door rails of up to 12'' knowing that the parts will come out perfect every time.
SPECS:
-Table size 16''x 12''x 0.75'' thick Table can vary slightly depending on how much material is removed to square edges +/- 0.25''.
-Capacity 12'' x 2''. Additional clamp platen can be ordered to increase capacity to over 4''. This takes less than a minute to swap out. If you need larger capacity check out our other models.
-Base model comes with 0.5'' x 2'' x 12'' long fence. One fixed hole two adjustable for squaring after fitting to machine and semi-permanent fixing.
-Two vertical clamping cylinders with a maximum 260 lbs clamping pressure.
-Horizontal cylinder clamp with 75+ lbs. of pressure to hold stock firmly to fence. Clamps are sequenced so horizontal clamp activates first pushing stock to fence then pressure shoe engages holding stock firmly to table.
-Adjustable fence for squaring cope/tenon ends after initial setup.
-Acrylic shield for operator safety. Height of Acrylic guard can be changed in under one minute.
-Clamp can either be ordered with foot pedal clamp control or fence mounted controls. Specify at time of order.
-Table is coated with non-slip clear material that can easily be recoated at any time with a quick scuff and spray.
- All fasteners and hardware are 100% aluminum and stainless.
-1/4'' NPT quick connect air fittings.
I want to speak very frankly to you about these products. I’m a straight shooter and I say what I mean and don’t BS anyone. There’s no point, my business reputation is to important to play games with prospective clients that we want to build a lifetime relationship with. Our tool offerings will be growing weekly and I want all of our amazing tools in everyone’s shops. They will make you and your product’s more profit and that’s the bottom line….
IF you know tools and machinery you know that big manufacturers would easily charge double for a fixture like this. If Martin, SCM or Felder had designed these tables they would be double the price if not more. However, fortunately for you we are a young start up with brilliant ideas and amazing execution. That being said we know we cannot charge what they are truly worth. So now you get to purchase something that will last a lifetime and make your lives safer more accurate and repeatable for a fraction of the value. These prices will absolutely be going up once this name has been established and we have built a reputable name. We simply will not be able to stay in business at these prices, but you have to start somewhere,
Image 1 of 5
Image 2 of 5
Image 3 of 5
Image 4 of 5
Image 5 of 5