Tier 4- Full Uno 2 Kit
Full Uno 2 kit
Shaker head included
WCT patent- pending static belt feeder. ULTIMATE CONTROL OF STOCK BEST FEED SYSTEM ON THE MARKET
adjustable height
short sticking down to 2 inch lengths.
shaker head included.
all dust collection included. You need to tell us if it’s being mounted above the table or below so we can assemble the machine in the correct configuration.
As long as your shaper spindle can handle 4’’ of tooling you can use the Uno2 kit.If your shaper does not have a 4” spindle, we either have them in stock for many standard machines or can source one for you. However, with stacking this tooling you should have at least a 3hp shaper. Do not add a taller sindle to a smaller 1 ½ or 2 hp machine. We will not sell you a kit for a smaller machine it is not safe. From 3/4’’ to 1.25’’ spindles and larger. You can cope and stick at the same time with our groundbreaking new kits. Almost all shapers with 1.25” spindle the standard kit works. Don’t be fooled this is real and yes you can add it to your existing machinery.. You can now produce doors faster than $100,000.00 CNC machinery on the market for a fraction of the cost. With this new kit full of amazing innovation and engineering you can produce cabinet doors more accurately with barely any setup. Either use your existing 4.5’’ cope and stick set which should work or buy our brand new kits with tons of geometries and profiles to choose from.
Kit includes:
-24’’x 48’’x 0.5’’ aluminum table.
Aluminum table has 36 holes for indexing the outboard fence alone. the outboard fence has a matching hole pattern in it with 12 different off set holes, meaning you never have to clamp again.
-heavy duty linear sliding table 0.75’’ thick aluminum table is now 12 1/2” wide and 19 1/2” long. Is now supported on true Hiwin styled linear guides.
The table now comes with a power feed mount built in that sits only 3/4” higher than a standard feeder. So any power feed made will work. You can purchase the kit with a brand new steff 3 wheeled feeder or you can purchase the 3 wheeled feeder as a track feeder in one of the other packages. For the ultimate processing feeder, purchase the new uno2 custom built feeder that will revolutionize and taket the place of all current stock feeders throughtout the industry.
Dust collection now inculuded 14” long phenolic risers for overhead dust collection and 7 “ for bottom mount dust collection,with two 4” dust hook ups. Central dust collection is also included with 4” hook up. Dust hood is also made of solid phenolic, lock mitered toegether on custom built machinery. Standard dusthood. If your machine has a table longer than 36’’ running with the direction you want to mount the kit you will have to use overhead dust collection.
The outboard fence is a piece of 1/2” by 4” solid phenolic material with over 20 holes for index positioning.
We recommend putting a digital readout on your machine.
-Patent pending installation kit to simplify the install on your machine. Kit includes spacer, bushings for 0.75’’ and 1’’ spindles. ¼ 20 flat head bolts. ¼ 20 tap with drill bit . We will have a full instructional video of how to install the mach8ine on youtube, tik tok and the wicked cool tools website.
-Installation manual with specs for adjustment and exactly how far to bush your cutters to never have to adjust your cutters manually again.
Not included:
Dust hose
The system is based off of 1/8” stock removal on both ends of the cope as well as 1/8” stock removal on the sticking. This allows use of the sliding table to stick very small parts simply by moving the spindle up to the correct position via supplied digital read out. An easy to install digital readout comes with every kit but you only need to use that if your using the same setup for your raised panels. You can do raised panels on the the same kit but you need to have a large capacity spindle with over 4.5’’ in tooling capacity. For instance a Powermatic PM 2700 works perfectly for this .
Uno two comes fixed to a half inch aluminum table. The table is approximately 32” x 46”. The table is 100% fitted and calibrated with our fences and all the tooling so all you need to do is slide it over the spindle, using our patent pending spacing system, and bolt it to the machine via pre drilled holes and bolts that are supplied. Once this is done you simply follow our instructions to bush your cutter or our cutters with the custom provided spacer then adjust the spindle to the height you want and go to work. You can set the profile to whatever depth you prefer and change tht on every job with no thinking. Both heads automatically adjust at the same time because we have done the work for you. I can’t explain what a joy it is to run this machine!
The shaper should be at least a 3hp machine with a 1’’ to 1.25’’ spindle to use all three operations. However a 3/4’’ with 3.5’’ of cutter capacity will work. You need to specify at the time of order what size spindle and height you have. If its large enough you can stack the panel back cutter and only have to move the head to use that, and it will adjust back into place via digital read out no tooling needs to be set up again.
Tooling with profiles and pricing from our catalog will be available to order by 3/12 to order. It wont cost much more than a standard set of insert tooling. We will have every standard profile and all custom profiles that fit within the geometry can be ordered upon request. That includes
-Shaker
-Bevel Shaker
-Ovolo
-Bead
-Bevel
-Square modern bead
-Ogee
and many others.
Tier 4- Full Uno 2 Kit
Full Uno 2 kit
Shaker head included
WCT patent- pending static belt feeder. ULTIMATE CONTROL OF STOCK BEST FEED SYSTEM ON THE MARKET
adjustable height
short sticking down to 2 inch lengths.
shaker head included.
all dust collection included. You need to tell us if it’s being mounted above the table or below so we can assemble the machine in the correct configuration.
As long as your shaper spindle can handle 4’’ of tooling you can use the Uno2 kit.If your shaper does not have a 4” spindle, we either have them in stock for many standard machines or can source one for you. However, with stacking this tooling you should have at least a 3hp shaper. Do not add a taller sindle to a smaller 1 ½ or 2 hp machine. We will not sell you a kit for a smaller machine it is not safe. From 3/4’’ to 1.25’’ spindles and larger. You can cope and stick at the same time with our groundbreaking new kits. Almost all shapers with 1.25” spindle the standard kit works. Don’t be fooled this is real and yes you can add it to your existing machinery.. You can now produce doors faster than $100,000.00 CNC machinery on the market for a fraction of the cost. With this new kit full of amazing innovation and engineering you can produce cabinet doors more accurately with barely any setup. Either use your existing 4.5’’ cope and stick set which should work or buy our brand new kits with tons of geometries and profiles to choose from.
Kit includes:
-24’’x 48’’x 0.5’’ aluminum table.
Aluminum table has 36 holes for indexing the outboard fence alone. the outboard fence has a matching hole pattern in it with 12 different off set holes, meaning you never have to clamp again.
-heavy duty linear sliding table 0.75’’ thick aluminum table is now 12 1/2” wide and 19 1/2” long. Is now supported on true Hiwin styled linear guides.
The table now comes with a power feed mount built in that sits only 3/4” higher than a standard feeder. So any power feed made will work. You can purchase the kit with a brand new steff 3 wheeled feeder or you can purchase the 3 wheeled feeder as a track feeder in one of the other packages. For the ultimate processing feeder, purchase the new uno2 custom built feeder that will revolutionize and taket the place of all current stock feeders throughtout the industry.
Dust collection now inculuded 14” long phenolic risers for overhead dust collection and 7 “ for bottom mount dust collection,with two 4” dust hook ups. Central dust collection is also included with 4” hook up. Dust hood is also made of solid phenolic, lock mitered toegether on custom built machinery. Standard dusthood. If your machine has a table longer than 36’’ running with the direction you want to mount the kit you will have to use overhead dust collection.
The outboard fence is a piece of 1/2” by 4” solid phenolic material with over 20 holes for index positioning.
We recommend putting a digital readout on your machine.
-Patent pending installation kit to simplify the install on your machine. Kit includes spacer, bushings for 0.75’’ and 1’’ spindles. ¼ 20 flat head bolts. ¼ 20 tap with drill bit . We will have a full instructional video of how to install the mach8ine on youtube, tik tok and the wicked cool tools website.
-Installation manual with specs for adjustment and exactly how far to bush your cutters to never have to adjust your cutters manually again.
Not included:
Dust hose
The system is based off of 1/8” stock removal on both ends of the cope as well as 1/8” stock removal on the sticking. This allows use of the sliding table to stick very small parts simply by moving the spindle up to the correct position via supplied digital read out. An easy to install digital readout comes with every kit but you only need to use that if your using the same setup for your raised panels. You can do raised panels on the the same kit but you need to have a large capacity spindle with over 4.5’’ in tooling capacity. For instance a Powermatic PM 2700 works perfectly for this .
Uno two comes fixed to a half inch aluminum table. The table is approximately 32” x 46”. The table is 100% fitted and calibrated with our fences and all the tooling so all you need to do is slide it over the spindle, using our patent pending spacing system, and bolt it to the machine via pre drilled holes and bolts that are supplied. Once this is done you simply follow our instructions to bush your cutter or our cutters with the custom provided spacer then adjust the spindle to the height you want and go to work. You can set the profile to whatever depth you prefer and change tht on every job with no thinking. Both heads automatically adjust at the same time because we have done the work for you. I can’t explain what a joy it is to run this machine!
The shaper should be at least a 3hp machine with a 1’’ to 1.25’’ spindle to use all three operations. However a 3/4’’ with 3.5’’ of cutter capacity will work. You need to specify at the time of order what size spindle and height you have. If its large enough you can stack the panel back cutter and only have to move the head to use that, and it will adjust back into place via digital read out no tooling needs to be set up again.
Tooling with profiles and pricing from our catalog will be available to order by 3/12 to order. It wont cost much more than a standard set of insert tooling. We will have every standard profile and all custom profiles that fit within the geometry can be ordered upon request. That includes
-Shaker
-Bevel Shaker
-Ovolo
-Bead
-Bevel
-Square modern bead
-Ogee
and many others.
Image 1 of 18
Image 2 of 18
Image 3 of 18
Image 4 of 18
Image 5 of 18
Image 6 of 18
Image 7 of 18
Image 8 of 18
Image 9 of 18
Image 10 of 18
Image 11 of 18
Image 12 of 18
Image 13 of 18
Image 14 of 18
Image 15 of 18
Image 16 of 18
Image 17 of 18
Image 18 of 18