Tier 2- Uno 2 with wheeled Feeder
-Uno2 as shown in photos
-Wheeled feeder included.
-Sticking first configuration
-Short sticking under 10 inches on linear table. shorter sticking requires track style feeder.
-shaker head included
-All componenets installed and ready to run.
As long as your shaper spindle can handle 4’’ of tooling you can use the Uno2 kit.If your shaper does not have a 4” spindle, we either have them in stock for many standard machines or can source one for you to add to our own library of spindles. However, with stacking this tooling you should have at least a 3hp shaper. Do not add a taller spindle to a smaller 1 ½ or 2 hp machine. We will not sell you a kit for a smaller machine it is not safe. From 1’’ to 1.25’’ spindles and larger. You can cope and stick at the same time with our groundbreaking new kits. Almost all shapers with 1.25” spindle the standard kit works. Don’t be fooled this is real and yes you can add it to your existing machinery.. You can now produce doors faster than $100,000.00 CNC machinery on the market for a fraction of the cost. With this new kit full of amazing innovation and engineering you can produce cabinet doors more accurately with barely any setup. Either use your existing 4.5’’ cope and stick set which should work or buy our brand new kits with tons of geometries and profiles to choose from.
Kit includes:
-24’’x 48’’x 0.5’’ aluminum table.
Aluminum table has 36 holes for indexing the outboard fence alone. the outboard fence has a matching hole pattern in it with 12 different off set holes, meaning you never have to clamp again. Table has engraved inch markings for fast setup.
-heavy duty linear sliding table 0.75’’ thick aluminum table is now 12 1/2” wide and 19 1/2” long. Now supported on true Hiwin styled linear guides.
The table now comes with a power feed mount built in that sits only 3/4” higher than a standard feeder. So any power feed made will work. You can purchase the kit with a brand new steff 3 wheeled feeder or you can purchase the 3 wheeled feeder as a track feeder in one of the other packages. For the ultimate processing feeder, purchase the new uno2 custom built feeder that will revolutionize and taket the place of all current stock feeders throughtout the industry.
Dust collection now inculuded 14” long phenolic risers for overhead dust collection and 7 “ for bottom mount dust collection,with two 4” dust hook ups. Central dust collection is also included with 4” hook up. Dust hood is also made of solid phenolic, lock mitered toegether on custom built machinery.
The outboard fence is a piece of 1/2” by 4” solid phenolic material with over 20 holes for index positioning.
We recommend putting a digital readout on your machine. Readout is supplied with machine. We will help with install info once once you let us know your machine. It’s usually a simple process but some machines aremore difficult. For instance if you have a machine that already has a ruler for height it will likely require one small l bracket and about 20 minutes to install.
-Patent pending installation kit to simplify the install on your machine. Kit includes spacer, bushings for 0.75’’ and 1’’ spindles. ¼ 20 flat head bolts. ¼ 20 tap with drill bit . Full instructional video is available on our youtube chanell.
-Installation manual with specs for adjustment and exactly how far to bush your cutters to never have to adjust your cutters manually again.
Not included:
Shaper machine
Dust hose
The system is based off of 1/8” stock removal on both ends of the cope as well as 1/8” stock removal on the sticking. This allows use of the sliding table to stick very small parts simply by moving the spindle up to the correct position via supplied digital read out. An easy to install digital readout comes with every kit but you only need to use that if your using the same setup for your raised panels. You can do raised panels on the the same kit but you need to have a large capacity spindle with over 4.5’’ in tooling capacity. For instance a Powermatic PM 2700 works perfectly for this .
Uno two comes fixed to a half inch aluminum table. The table is approximately 24” x 48”. The table is 100% fitted and calibrated with our fences and all the tooling so all you need to do is slide it over the spindle, using our patent pending spacing system, and bolt it to the machine via pre drilled holes and bolts that are supplied. Once this is done you simply follow our instructions to bush your cutter or our cutters with the custom provided spacer then adjust the spindle to the height you want and go to work. You can set the profile to whatever depth you prefer and change that on every job with no thinking. Both heads automatically adjust at the same time because we have done the work for you. I can’t explain what a joy it is to run this machine!
The shaper should be at least a 3hp machine with a 1’’ to 1.25’’ spindle.
Tooling with profiles and pricing from our catalog will be available to order by 3/12 to order. It wont cost much more than a standard set of insert tooling. We will have every standard profile and all custom profiles that fit within the geometry can be ordered upon request. Remember you can use almost all other 4.5’’ heads and only need to set it up the first time. You simply save the amount it takes off for stock removal after stick and cope and calibrate your stock accordingly.
-Shaker
-Bevel Shaker
-Ovolo
-Bead
-Bevel
-Square modern bead
-Ogee
and many others.
Tier 2- Uno 2 with wheeled Feeder
-Uno2 as shown in photos
-Wheeled feeder included.
-Sticking first configuration
-Short sticking under 10 inches on linear table. shorter sticking requires track style feeder.
-shaker head included
-All componenets installed and ready to run.
As long as your shaper spindle can handle 4’’ of tooling you can use the Uno2 kit.If your shaper does not have a 4” spindle, we either have them in stock for many standard machines or can source one for you to add to our own library of spindles. However, with stacking this tooling you should have at least a 3hp shaper. Do not add a taller spindle to a smaller 1 ½ or 2 hp machine. We will not sell you a kit for a smaller machine it is not safe. From 1’’ to 1.25’’ spindles and larger. You can cope and stick at the same time with our groundbreaking new kits. Almost all shapers with 1.25” spindle the standard kit works. Don’t be fooled this is real and yes you can add it to your existing machinery.. You can now produce doors faster than $100,000.00 CNC machinery on the market for a fraction of the cost. With this new kit full of amazing innovation and engineering you can produce cabinet doors more accurately with barely any setup. Either use your existing 4.5’’ cope and stick set which should work or buy our brand new kits with tons of geometries and profiles to choose from.
Kit includes:
-24’’x 48’’x 0.5’’ aluminum table.
Aluminum table has 36 holes for indexing the outboard fence alone. the outboard fence has a matching hole pattern in it with 12 different off set holes, meaning you never have to clamp again. Table has engraved inch markings for fast setup.
-heavy duty linear sliding table 0.75’’ thick aluminum table is now 12 1/2” wide and 19 1/2” long. Now supported on true Hiwin styled linear guides.
The table now comes with a power feed mount built in that sits only 3/4” higher than a standard feeder. So any power feed made will work. You can purchase the kit with a brand new steff 3 wheeled feeder or you can purchase the 3 wheeled feeder as a track feeder in one of the other packages. For the ultimate processing feeder, purchase the new uno2 custom built feeder that will revolutionize and taket the place of all current stock feeders throughtout the industry.
Dust collection now inculuded 14” long phenolic risers for overhead dust collection and 7 “ for bottom mount dust collection,with two 4” dust hook ups. Central dust collection is also included with 4” hook up. Dust hood is also made of solid phenolic, lock mitered toegether on custom built machinery.
The outboard fence is a piece of 1/2” by 4” solid phenolic material with over 20 holes for index positioning.
We recommend putting a digital readout on your machine. Readout is supplied with machine. We will help with install info once once you let us know your machine. It’s usually a simple process but some machines aremore difficult. For instance if you have a machine that already has a ruler for height it will likely require one small l bracket and about 20 minutes to install.
-Patent pending installation kit to simplify the install on your machine. Kit includes spacer, bushings for 0.75’’ and 1’’ spindles. ¼ 20 flat head bolts. ¼ 20 tap with drill bit . Full instructional video is available on our youtube chanell.
-Installation manual with specs for adjustment and exactly how far to bush your cutters to never have to adjust your cutters manually again.
Not included:
Shaper machine
Dust hose
The system is based off of 1/8” stock removal on both ends of the cope as well as 1/8” stock removal on the sticking. This allows use of the sliding table to stick very small parts simply by moving the spindle up to the correct position via supplied digital read out. An easy to install digital readout comes with every kit but you only need to use that if your using the same setup for your raised panels. You can do raised panels on the the same kit but you need to have a large capacity spindle with over 4.5’’ in tooling capacity. For instance a Powermatic PM 2700 works perfectly for this .
Uno two comes fixed to a half inch aluminum table. The table is approximately 24” x 48”. The table is 100% fitted and calibrated with our fences and all the tooling so all you need to do is slide it over the spindle, using our patent pending spacing system, and bolt it to the machine via pre drilled holes and bolts that are supplied. Once this is done you simply follow our instructions to bush your cutter or our cutters with the custom provided spacer then adjust the spindle to the height you want and go to work. You can set the profile to whatever depth you prefer and change that on every job with no thinking. Both heads automatically adjust at the same time because we have done the work for you. I can’t explain what a joy it is to run this machine!
The shaper should be at least a 3hp machine with a 1’’ to 1.25’’ spindle.
Tooling with profiles and pricing from our catalog will be available to order by 3/12 to order. It wont cost much more than a standard set of insert tooling. We will have every standard profile and all custom profiles that fit within the geometry can be ordered upon request. Remember you can use almost all other 4.5’’ heads and only need to set it up the first time. You simply save the amount it takes off for stock removal after stick and cope and calibrate your stock accordingly.
-Shaker
-Bevel Shaker
-Ovolo
-Bead
-Bevel
-Square modern bead
-Ogee
and many others.
Image 1 of 18
Image 2 of 18
Image 3 of 18
Image 4 of 18
Image 5 of 18
Image 6 of 18
Image 7 of 18
Image 8 of 18
Image 9 of 18
Image 10 of 18
Image 11 of 18
Image 12 of 18
Image 13 of 18
Image 14 of 18
Image 15 of 18
Image 16 of 18
Image 17 of 18
Image 18 of 18