FAST, PRECISE FENCE POSITIONING
UNO Elite Kit
$17,500
The Elite adds our linear-guided pneumatic locking fence for faster, more precise
positioning and versatile production.
Ideal for shops producing several kitchens per week.
A full digital readout provides fast, precise fence positioning. The system operates with the familiar simplicity
of a Biesemeyer-style table-saw fence, but the linear-guided pneumatic locking design is substantially more
rigid, repeatable, and accurate.
The package includes:
■ Complete UNO processing kit
■ Linear-guided pneumatic locking fence
■ Full digital fence-position readout
■ Wicked Cool Tools heavy-duty feed unit
■ Special precision installation and alignment bushing
■ Complete double-sided cope-and-stick capability
■ Short-part sticking using the coping table
10 INCHES MAX 45-60 DOORS/HOUR
Maximum sticking width With one operator
Pre-coped parts as short as 3 inches can be sticked through the heavy-duty feed unit.
Shaper is not included.
SHAPER REQUIREMENT: To use an UNO kit, we recommend a shaper with a 1-1/4-inch spindle and 4
inches of tool-stack capacity. A smaller-diameter spindle may be used, but it is not recommended.
Regardless of spindle diameter, the shaper must provide a full 4 inches of usable tool-stack capacity
beneath the spindle nut when the nut is fully engaged. This requirement must be met to install and
operate the product safely.
9
FAST, PRECISE FENCE POSITIONING
UNO Elite Kit
$17,500
The Elite adds our linear-guided pneumatic locking fence for faster, more precise
positioning and versatile production.
Ideal for shops producing several kitchens per week.
A full digital readout provides fast, precise fence positioning. The system operates with the familiar simplicity
of a Biesemeyer-style table-saw fence, but the linear-guided pneumatic locking design is substantially more
rigid, repeatable, and accurate.
The package includes:
■ Complete UNO processing kit
■ Linear-guided pneumatic locking fence
■ Full digital fence-position readout
■ Wicked Cool Tools heavy-duty feed unit
■ Special precision installation and alignment bushing
■ Complete double-sided cope-and-stick capability
■ Short-part sticking using the coping table
10 INCHES MAX 45-60 DOORS/HOUR
Maximum sticking width With one operator
Pre-coped parts as short as 3 inches can be sticked through the heavy-duty feed unit.
Shaper is not included.
SHAPER REQUIREMENT: To use an UNO kit, we recommend a shaper with a 1-1/4-inch spindle and 4
inches of tool-stack capacity. A smaller-diameter spindle may be used, but it is not recommended.
Regardless of spindle diameter, the shaper must provide a full 4 inches of usable tool-stack capacity
beneath the spindle nut when the nut is fully engaged. This requirement must be met to install and
operate the product safely.
9
