Uno2 is here and ready to order.
Machinery is 3hp single phase with plug ready to go to work the moment your get it.
Fully built uno2 kit on a Jet 3 hp single phase shaper. Shaper runs very well. This machine has a 3/4” spindle that is big enough for cope and stick. It will be sold with a set of our shaker door heads so you can work immediately. We can also provide a brand new Steff power feeder with track kit for an additional 2500. Or you can bolt a feeder on for yourself to the already installed feeder bracket which now sits 1.25” off the table so any feeder works.
Machine with cutter $10,450
With optional track feeder installed $12,950
Optional dust kits are also available as well as many insert profile knives to choose from.
Kit includes
Jet WSS-S-1 3hp 1 phase.
ONE SHAKER DOOR INSERT TOOLING SET 1000.00 value Other sets available for purchase
Full Uno2 kit described below.
1.25’’ remanufactured spindle that allows you to cope, stick and back cut your panels. You can also buy any of our raised panel cutters that work within our geometries. Yes you can do a full raised panel on our Uno 2 system.
-heavy duty linear sliding table 0.75’’ thick aluminum table with 10’’x 1.375’’ capacity. This can be changed in just a few minutes to a larger capacity of 2’’ and up to 5’’ but is not necessary for cabinet doors. It’s exactly what you saw in the most recent videos.
-Entire Uno2 patent pending system.
This kit will change the way you work and you will enjoy making doors again!
-Dust collection kit . Two custom 4’’ ports on either end of the machine that you can mount to go to the floor or ceiling. This patent pending kit can be used for either application.
-Outboard fence with locking knobs and a special indexing system bored directly into the machine table allows you to adjust your sizes up to 16’ and more without the use of clamps.
-Patent pending dust collection hood.
-Digital readout pre installed on Delta machine.
-Full instructional manual.
This introductory price will not last long. This technology and what it does for cabinet makers and the engineering with the overwhelming amount of time that it takes to create Uno 2 will not last at these prices. if you want a complete machine and not a kit simply choose from one of those other options!
We will soon be offering our own custom built track feeders just for Uno 2
Check back in weekly for new products and machinery!!!
Not included:
Power feed
We will be offering 100% built by us In the USA power feeds and track feeds before your machine ships if you decide to order one with your machine. We will install it for you.
The dust collection kit and parts are not part of this but available separately.
The system is based off of 1/8” stock removal on both ends of the cope as well as 1/8” stock removal on the sticking. This allows use of the sliding table to stick very small parts simply by moving the spindle up to the correct position via supplied digital read out.
Tooling with profiles and pricing from our catalog will be available to order by 3/12 to order. It wont cost much more than a standard set of insert tooling. We will have every standard profile and all custom profiles that fit within the geometry can be ordered upon request. That includes
-Shaker
-Bevel Shaker
-Ovolo
-Bead
-Bevel
-Square modern bead
-Ogee
and more.
Uno2 is here and ready to order.
Machinery is 3hp single phase with plug ready to go to work the moment your get it.
Fully built uno2 kit on a Jet 3 hp single phase shaper. Shaper runs very well. This machine has a 3/4” spindle that is big enough for cope and stick. It will be sold with a set of our shaker door heads so you can work immediately. We can also provide a brand new Steff power feeder with track kit for an additional 2500. Or you can bolt a feeder on for yourself to the already installed feeder bracket which now sits 1.25” off the table so any feeder works.
Machine with cutter $10,450
With optional track feeder installed $12,950
Optional dust kits are also available as well as many insert profile knives to choose from.
Kit includes
Jet WSS-S-1 3hp 1 phase.
ONE SHAKER DOOR INSERT TOOLING SET 1000.00 value Other sets available for purchase
Full Uno2 kit described below.
1.25’’ remanufactured spindle that allows you to cope, stick and back cut your panels. You can also buy any of our raised panel cutters that work within our geometries. Yes you can do a full raised panel on our Uno 2 system.
-heavy duty linear sliding table 0.75’’ thick aluminum table with 10’’x 1.375’’ capacity. This can be changed in just a few minutes to a larger capacity of 2’’ and up to 5’’ but is not necessary for cabinet doors. It’s exactly what you saw in the most recent videos.
-Entire Uno2 patent pending system.
This kit will change the way you work and you will enjoy making doors again!
-Dust collection kit . Two custom 4’’ ports on either end of the machine that you can mount to go to the floor or ceiling. This patent pending kit can be used for either application.
-Outboard fence with locking knobs and a special indexing system bored directly into the machine table allows you to adjust your sizes up to 16’ and more without the use of clamps.
-Patent pending dust collection hood.
-Digital readout pre installed on Delta machine.
-Full instructional manual.
This introductory price will not last long. This technology and what it does for cabinet makers and the engineering with the overwhelming amount of time that it takes to create Uno 2 will not last at these prices. if you want a complete machine and not a kit simply choose from one of those other options!
We will soon be offering our own custom built track feeders just for Uno 2
Check back in weekly for new products and machinery!!!
Not included:
Power feed
We will be offering 100% built by us In the USA power feeds and track feeds before your machine ships if you decide to order one with your machine. We will install it for you.
The dust collection kit and parts are not part of this but available separately.
The system is based off of 1/8” stock removal on both ends of the cope as well as 1/8” stock removal on the sticking. This allows use of the sliding table to stick very small parts simply by moving the spindle up to the correct position via supplied digital read out.
Tooling with profiles and pricing from our catalog will be available to order by 3/12 to order. It wont cost much more than a standard set of insert tooling. We will have every standard profile and all custom profiles that fit within the geometry can be ordered upon request. That includes
-Shaker
-Bevel Shaker
-Ovolo
-Bead
-Bevel
-Square modern bead
-Ogee
and more.
